-
Time: 2022-01-06 Views: 45
The aluminum alloy wind knife mainly consists of a circular air inlet, a wide straight air duct, a splitter plate, a gradually narrowing air duct, and a straight narrow air duct. The width of the air duct can be adjusted, which means that the air outlet speed, air volume, and air pressure can be adjusted. It has the characteristics of low wind resistance and low pressure loss. The specific application of aluminum alloy wind knife is as follows: 1. Printing (inkjet): inkjet, before printing ..
-
Time: 2022-01-06 Views: 44
What is the reason for the high vibration of the high-pressure blower? During the actual operation of the high-pressure blower, this symptom may occur. In fact, these symptoms can be divided into many different types. During the movement, you will find that after the equipment and motor vibrate, the frequency or speed of the vibration is the same ..
-
Time: 2022-01-06 Views: 43
The ZTB centrifugal blower has a beautiful appearance, balanced operation, and easy use. The fan blades are made of high-strength aluminum alloy; It has dual functions of blowing and suction, and can be used for both suction and blowing. Compared to other fans, its pressure is much higher, and both dynamic and negative pressure are often ordinary ..
-
Time: 2022-01-06 Views: 42
Overview of CZ medium voltage aluminum shell blower series CZ medium voltage aluminum shell blower forms CZ series fans are designed with A-type (motor direct connection, single inlet) aluminum alloy shells, including 180W, 250W, 370W, 550W, 750W, 900W, 1.1KW, 1.5KW, 2.2KW, 3KW, a total of ten machine numbers CZ
-
Time: 2022-01-06 Views: 33
Why does sewage treatment require aeration? The purpose of aeration is to allow activated sludge to undergo aerobic respiration, further decomposing organic matter into inorganic matter. The function of removing pollutants. To run well, it is necessary to control the oxygen content and other necessary conditions of microorganisms, so that microorganisms can carry out aerobic respiration with greater benefits. The aeration tank mainly relies on aerobic microorganisms ..
-
Time: 2022-01-06 Views: 32
Due to the widespread use of high-pressure fans in high vortex air pumps, their selection is relatively complex. Let's first understand the principle and characteristics of high-pressure fans for better selection. What is a vortex air pump high-pressure fan? Under design conditions, fans with wind pressures ranging from 30kPa to 200KPa or compression ratios of e=1.3~3 are considered ..
-
Time: 2022-01-06 Views: 41
The principle and characteristics of the aeration fan are that the impeller of the vortex air pump is composed of several blades, similar to the impeller of a large gas turbine. The air in the middle of the impeller blades is subjected to centrifugal force and moves towards the edge of the impeller, where it enters the annular cavity of the pump body and circulates again in the same way from the starting point of the blades. The circulating gas generated by the rotation of the impeller ..
-
Time: 2022-01-06 Views: 40
Wind knives are widely used in the industrial field for blowing water and dust removal, such as blowing off dust and moisture on flat surfaces such as steel plates and aluminum alloy profiles, blowing off moisture on the surface of beverage bottles, packaging cans, and other bottle bodies, blowing off impurities, dust, residue, moisture on product surfaces, and cleaning conveyor belts. Under the condition of compressed air supply ..
-
Time: 2022-01-06 Views: 31
What is a blower used for? A blower belongs to ventilation equipment. The boiler is enclosed, and combustion consumes oxygen in the enclosed space, generating gases such as carbon dioxide and carbon monoxide. Oxygen is a combustion aid, so ventilation involves introducing air into a closed room, which requires oxygen to assist combustion. The characteristics of a blower: 1. The blower does not require lubrication due to the frictionless operation of the impeller inside the body ..
-
Time: 2022-01-06 Views: 20
The supporting fan for the stretching and shaping machine is the R series centrifugal fan. The casing of the R series centrifugal fan is made of special equipment with biting and edging, which is sturdy and durable, and has a beautiful and generous appearance. The supporting motor is an aluminum alloy shell motor, equipped with NSK bearings, and uses high-temperature enameled wire. The impeller undergoes strict dynamic balance correction, resulting in smooth operation of the fan and motor vibration ..
-
Time: 2022-01-06 Views: 38
The preparation work for using a high-pressure blower and how to use it correctly. When operating a high-pressure blower, workers should pay attention to using the correct method to better complete the corresponding work tasks and achieve the purpose of use. The high-pressure blower manufacturer told us that many people may not know when using the equipment ..
-
Time: 2022-01-06 Views: 30
What are the potential markets for high-pressure blowers in 2018, and what is the demand for high-pressure blower products in these markets? With the rapid development of China's economy, especially the continuous development of the machinery industry in recent years, the high-pressure blower industry has brought rare development opportunities, and high-pressure blowers have been widely used in various industries in China. ...
Exhibition High~Alibaba Customer Service
