ZTB transparent centrifugal blower

ZTB transparent centrifugal blower

Zhangao ZTB Transparent Centrifugal Blower

Beautiful appearance, balanced operation, easy to use, and the fan blades are made of high-strength aluminum alloy; It has dual functions of blowing and suction, and can be used for both suction and blowing. Compared with other fans, its pressure is much higher, whether it is dynamic pressure or negative pressure, it is often more than ten times that of ordinary fans.

Exhibition height ZTB transparent stylecentrifugal fanPerformance advantages:

1. Oil free, water free compression.

2. Reliable operation, sturdy and durable

3. Reliable design and lightweight

4. All motors of high-voltage fans have a protection level of IP55 and F-class insulation.

5. Adopting dual frequency (50/60HZ) and wide voltage motors to meet voltage levels in almost all regions of the world.

6. The external bearing design enables the fan to withstand high operating temperatures and improves its operational reliability and service life.

7. Introducing a new concept of variable frequency drive can improve performance by up to 300% compared to the same model driven by ordinary motors.

The sealing form between the impeller and the pump body reduces the pressure loss of high-pressure gas during compression.

Zhangao ZTB Transparent Centrifugal Fan

The selection method is the same as that of high-pressure fans. Generally speaking, the following two steps need to be followed:

1. It is necessary to determine the function of the high-pressure fan used on site, whether it is suction or blowing, and find the corresponding pressure flow curve of the high-pressure fan; If the curve is misread, sometimes the selected product cannot be used;  

2. Based on the calculated pressure and flow rate, find the working curve above the corresponding working point that satisfies both pressure and flow rates on the curve graph; Then select the high-pressure fan model based on the working curve; As long as it is a different work site, its requirements for pressure and flow rate are different, so in order to obtain relative data, relevant calculations need to be carried out. This needs to be done by designers or consulted with companies.  

Installation precautions for ZTB transparent centrifugal fan in Zhangao

1. Installation location: It must be installed indoors in a place that is not affected by wind and rain

2. Environmental temperature: below 40 ℃
3. Relative humidity: below 80%
4. Air quality: If there are corrosive or flammable gases such as acids and alkalis in the air, they should not be transported by high-pressure blowers to avoid danger
5. Dust protection: Avoid using in places with large amounts of dust, powder, or fibers. If it is necessary to use in such places, please install a filter and regularly clean the dust attached to the filter and inside the high-pressure blower
6. Ventilation and heat dissipation: Please choose to use it in a well ventilated place and not in a sealed room or box
7. Placement space: For the convenience of column maintenance or repair, please avoid installing in overly narrow locations
8. Avoid vibration: Please install in a vibration free location; If the vibration in the venue is unavoidable, anti vibration measures must be installed to prevent the high-pressure blower from being damaged by external vibrations.