Aluminum alloy wind knifeIt mainly consists of a circular air inlet, a wide straight air duct, a splitter plate, a gradually narrowing air duct, and a straight narrow air duct. The width of the air duct can be adjusted, which means that the air outlet speed, air volume, and air pressure can be adjusted. It has the characteristics of low wind resistance and low pressure loss.
The specific application of aluminum alloy wind knives is as follows:
1. Printing (inkjet): Inkjet printing, blowing away dust, debris, and water vapor before printing, or used for rapid drying of ink.
2. Beverage canning and bottle making: Before labeling, inkjet printing, or packaging beverage bottles, blow off the moisture and attachments from the bottle mouth or body.
3. Electronics industry: Electronic circuit boards are quickly dried before assembly.
4. Food and medicine: Blow off moisture and attachments before manufacturing or packaging, or remove dust from openings and bags before packaging.
5. Rubber and plastic industry: Blow off dust or debris on the surface of products. Dry before extrusion or injection. After injection molding, the product cools down.
6. Metal industry: blowing coolant or other liquids from the surface of metals. Dry or cool the surface before polishing, electroplating, and painting processes.
Characteristics of Aluminum Alloy Wind Knife:
1. The manufacturing material of the wind blade is aluminum alloy or stainless steel. The aluminum alloy wind blade undergoes electroplating treatment in the manufacturing process, and its service life is much longer than other similar products. The stainless steel wind blade can be used in high temperature and high corrosion environments;
2. Full Airflow; Design, that is, the width of the wind blade is exactly the same as the width of the wind curtain blown out by the wind blade. The back of the wind blade has installation and connection screw holes, which can be combined according to the required length;
3. The wind knife can drain 40 times the ambient air, with a gas consumption only 1/5 of that of traditional blowing pipes;
4. There are no worn parts inside the wind blade, and the internal gasket is made of stainless steel material, with a service life of over 10 years;
5. Powered by compressed air, no electricity required, suitable for use in explosion-proof environments.
Exhibition High~Alibaba Customer Service
