-
Time: 2022-01-06 Views: 45
The aluminum alloy wind knife mainly consists of a circular air inlet, a wide straight air duct, a splitter plate, a gradually narrowing air duct, and a straight narrow air duct. The width of the air duct can be adjusted, which means that the air outlet speed, air volume, and air pressure can be adjusted. It has the characteristics of low wind resistance and low pressure loss. The specific application of aluminum alloy wind knife is as follows: 1. Printing (inkjet): inkjet, before printing ..
-
Time: 2022-01-06 Views: 44
What is the reason for the high vibration of the high-pressure blower? During the actual operation of the high-pressure blower, this symptom may occur. In fact, these symptoms can be divided into many different types. During the movement, you will find that after the equipment and motor vibrate, the frequency or speed of the vibration is the same ..
-
Time: 2022-01-06 Views: 43
The ZTB centrifugal blower has a beautiful appearance, balanced operation, and easy use. The fan blades are made of high-strength aluminum alloy; It has dual functions of blowing and suction, and can be used for both suction and blowing. Compared to other fans, its pressure is much higher, and both dynamic and negative pressure are often ordinary ..
-
Time: 2022-01-06 Views: 42
Overview of CZ medium voltage aluminum shell blower series CZ medium voltage aluminum shell blower forms CZ series fans are designed with A-type (motor direct connection, single inlet) aluminum alloy shells, including 180W, 250W, 370W, 550W, 750W, 900W, 1.1KW, 1.5KW, 2.2KW, 3KW, a total of ten machine numbers CZ
-
Time: 2022-01-06 Views: 41
The principle and characteristics of the aeration fan are that the impeller of the vortex air pump is composed of several blades, similar to the impeller of a large gas turbine. The air in the middle of the impeller blades is subjected to centrifugal force and moves towards the edge of the impeller, where it enters the annular cavity of the pump body and circulates again in the same way from the starting point of the blades. The circulating gas generated by the rotation of the impeller ..
-
Time: 2022-01-06 Views: 40
Wind knives are widely used in the industrial field for blowing water and dust removal, such as blowing off dust and moisture on flat surfaces such as steel plates and aluminum alloy profiles, blowing off moisture on the surface of beverage bottles, packaging cans, and other bottle bodies, blowing off impurities, dust, residue, moisture on product surfaces, and cleaning conveyor belts. Under the condition of compressed air supply ..
-
Time: 2022-01-06 Views: 38
The preparation work for using a high-pressure blower and how to use it correctly. When operating a high-pressure blower, workers should pay attention to using the correct method to better complete the corresponding work tasks and achieve the purpose of use. The high-pressure blower manufacturer told us that many people may not know when using the equipment ..
-
Time: 2022-01-06 Views: 39
The RB series high-pressure blower is an essential industry mechanical equipment in various industries. The use of high-pressure blowers is very extensive because their selection is relatively complex. Generally speaking, the following two steps need to be followed: 1. Firstly, it is necessary to determine what function of the RB high-pressure blower is used on site, whether it is suction or blowing, and the pressure of suction and blowing ..
-
Time: 2022-01-06 Views: 37
The installation method of the air ring blower is that the outer opening faces up, the inner opening faces down, with the letter facing up and the letter facing down. Misalign the openings to avoid gas leakage.
-
Time: 2022-01-06 Views: 36
Air ring blower, also known as side flow blower or air ring vacuum pump, is used for exhaust. The working principle of the G series air ring pump is that the impeller of the G series air ring blower is directly installed on the motor rotor, which is completely contactless compression. Due to the installation of the pump shaft outside the compression chamber, the machine's high operational reliability can be ensured even when working under large pressure differentials. Qi ..
-
Time: 2022-01-06 Views: 35
Vortex blower is a widely used universal air source that can blow or suck air. Oil free lubrication design (energy conservation and environmental protection), wide frequency and wide voltage design (convenient for use), centrifugal circulation design (better performance), air flow buffer design (pressure and noise reduction) are widely used in plastic machinery, industrial dust collection equipment, foam machinery ..
-
Time: 2022-01-06 Views: 34
Explanation on the maintenance of high-pressure centrifugal fan faults. Due to its high rotational speed, the balance requirements for high-pressure blowers are also very high. Therefore, our company has conducted balance tests on the produced high-pressure blowers, especially the impellers of the fans. The impeller of a high-pressure fan is very sensitive to the balance around it, but it does not have strict requirements for the slight imbalance in its center ..
Exhibition High~Alibaba Customer Service
