Vortex blowerThe manufacturer will communicate with everyone under what circumstances simple maintenance of the vortex air pump can be carried out.
In order to extend the service life of vortex air pumps and reduce the probability of equipment failure during operation, many companies attach great importance to the maintenance and upkeep of such equipment. When there is a decrease in traffic, an increase in noise, or an increase in temperature in the equipment, simple maintenance can be performed on the equipment, and only the operator needs to handle it.
When the vortex air pump experiences a decrease in flow rate during operation, the equipment can be stopped first, and the power can be cut off. Then, check if there is anything blocking the air inlet of the equipment. If there is something blocking, it will cause a decrease in flow rate. After resolving this issue, you can plug in the power and turn on the device to see if it can operate normally.
If there is a problem of excessive noise during the operation of the vortex air pump, it may be due to debris inside the pump, and the friction between the debris and the equipment may cause abnormal noise from the equipment. Alternatively, it could also be caused by the impeller getting stuck. After the impeller gets stuck, it can be directly treated to restore the device to normal. If the noise does not decrease but instead increases after processing, it may be due to bearing damage. You can directly contact the manufacturer to replace the bearings with new ones.
When the temperature of the vortex air pump rises during use, first check if there are any foreign objects blocking it, then open the filter to clean up the debris, and then perform a simple maintenance on the equipment.
Exhibition High~Alibaba Customer Service
